Rough-country 5060 User Manual download pdf

CJ SHACKLE INVERSION KIT

Thank you for choosing Rough Country for all your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Check the kit hardware against the parts list on this page. Be sure

you have all needed parts and know where they go. Also please review tools needed list and make sure you have

needed tools.

PRODUCT USE INFORMATION

Rough Country makes no claims regarding and will not be responsible for any product that is altered.

We will be happy to answer any questions concerning the design, function, and correct use of our products.

NOTICE TO DEALER AND VEHICLE OWNER

Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of

the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehi-

cle of its unique handling characteristics.

INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on

to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.

This kit is designed to ease the harsh ride of the leaf sprung vehicle. Repositioning the shackle to the rear of the spring

allow the leaf spring to move freely through various road conditions. Stock shackles are recommended for this kit.

Installing lifted or longer than factory shackles could create driveshaft vibration and could cause the driveshaft

to separate when the suspension is fully extended.

Kit Contents:

Driver Shackle Bracket

Pass Shackle Bracket

Driver Fr Stationary Bracket

Pass Fr Stationary Bracket

Cross Brace

92506000

Tools Needed:

9/16” Socket / Wrench

3/4” Socket / Wrench

13/16” Socket

7/8” Socket

1 1/8” Socket

Center Punch

Hand Grinder

Hammer

3/8” Drill Bit

1/2” Drill Bit

49/64” Drill Bit

Drill

Tape Measure

Torque Specs:

Size Grade 5 Grade 8

3/8” 30 ft/lbs 35 ft/lbs

1/2” 65 ft/lbs 90 ft/lbs

9/16” 95 ft/lbs 130 ft/lbs

3/4” 185 ft/lbs 280 ft/lbs

1 2 3 4

CJ SHACKLE INVERSION KIT 1

Summary of Contents

Page 1 - CJ SHACKLE INVERSION KIT

CJ SHACKLE INVERSION KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install t

Page 2

FRONT INSTALLATION INSTRUCTIONS 1. Lift front of vehicle and place jack stands under front of frame rails. Remove front wheels. 2. Support front ax

Page 3

9. Install new bracket into place and loosely clamp making sure the ¾” holes on the bracket are on the outside of the frame rail. Measure 43.50 inch

Page 4

13. Install the stock leaf spring plates with the stock u-bolts and tighten using a 3/4” socket. Reinstall the sway bar links on the spring plate usin

Comments to this Manuals

No comments

Rough-country 5060 User Manual

Browse online or download User Manual for For the car Rough-country 5060. Rough Country 5060 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Rough-country 5060