Rough-country 324S User Manual download pdf (Page 9)

36. Install lower control arm using stock cam bolts. See Photo 31.

37. Install skid plate using supplied 3/8” X 1” bolts and 3/8” washers on the front cross-member. Use 14mm socket to

tighten. See Photo 32.

38. Install the skid plate on the rear cross-member as shown in Photo 33 with the supplied 3/8” x 1” and washers.

39. Using 1 1/16 wrench and socket tighten cross member bolts. See Photo 34.

40. Install axle shafts making sure the axle is fully engaged in the housing. See Photo 35.

41. Install 3/8 studs into strut spacer using 14mm socket. See Photo 36. It may be necessary to lightly tap studs in.

PHOTO 31 PHOTO 32

PHOTO 33 PHOTO 34

PHOTO 35 PHOTO 36

INSTALL THE CONTROL ARM TIGHTEN SKID PLATE HARDWARE

INSTALL SKID PLATE

TIGHTEN HARDWARE

REINSTALL THE HALF SHAFTS INSTALL THE STRUT STUDS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Rough-country 324S User Manual Page 9