Rough-country 324S User Manual download pdf (Page 6)

17. Remove the two upper diff bolt from the motor mount / diff mount using 18mm socket. Retain the stock hardware .

See Photo 13.

18. Remove rear cross-member using 18mm wrench. See Photo 14.

19. Remove driveshaft from diff using 15mm wrench. See Photo 15.

20. Support the diff and remove the passenger side bolts with 18mm wrench and remove the 3 bolts on driver side with

same wrenches. See Photo 16 & 17.

21. Carefully remove differential from vehicle.

22. Follow the differential wiring harness up from the differential and remove the 3 plastic retainers securing the wiring

harness to the frame. See Photo 18. This is performed to allow slack in the line when the differential is reinstalled

with the differential brackets.

PHOTO 13

PHOTO 14

PHOTO 15

PHOTO 16

PHOTO 17

REMOVE THE UPPER MOUNT HARDWARE

REMOVE THE REAR CROSSMEMBER

REMOVE THE DRIVESHAFT BOLTS REMOVE PASSENGER SIDE HARDWARE

REMOVE THE DR SIDE DIFF HARDWARE

PHOTO 18

REMOVE THE HARNESS FROM THE FRAME

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Rough-country 324S User Manual Page 6