Rough-country 324S User Manual download pdf (Page 10)

42. Install the spacer on strut using stock hardware using 15mm wrench. See Photo 37.

43. Install strut onto truck using 14mm wrench to tighten upper supplied 3/8” nuts and washers See Photo 38.

44. Attach lower control arm to lower part of strut using stock hardware. Tighten lower strut hardware using a 24mm and

21 mm wrench. See Photo 39.

45. Remove sway-bar link from control arm using 18mm and 8mm wrench.

46. Install the lower link bracket on the lower control arm with the supplied 12mm X 50mm bolt and flange nuts. Install

the new link on the bracket with the supplied 12mm x 65mm bolts and flange nuts. Tighten using a 18mm and 19mm

socket & wrench. See Photo 40.

47. Install the sway bar link bracket to the bottom side of the sway bar and tighten with the 12mm x 35mm bolts and

flange nut. Tighten using a 18mm and 19mm wrench. Next install the sway bar link to the bracket and tighten using

the 12mm x 65mm bolts and flange nuts. See Photo 41.

48. Using a 13mm wrench remove bolt from brake line mount and pull brake line out to give clearance for cutting. See

Photo 42.

PHOTO 37

PHOTO 38

PHOTO 39

PHOTO 42

PHOTO 40

PHOTO 41

INSTALL THE SPACER ON STRUT

INSTALL STRUT ON FRAME

ATTACH THE LOWER STRUT

INSTALL THE SWAY BAR LINK

INSTALL THE UPPER SWAY BAR LINK REMOVE THE BRAKE LINE MOUNT

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Rough-country 324S User Manual Page 10