Rough-country 324S User Manual download pdf (Page 7)

23. Align the supplied template with the lower holes. Tape cut out to driver side lower control arm rear pocket.

24. Cut at the line on the cut out. this is done to make room for rear cross member. Grind sharp edges and paint. See

Photo 19 & 20.

25. Install rear diff drop bracket on the differential using the stock hardware. See Photo 21. Tighten using a 18mm

wrench.

26. Install driver side upper diff drop bracket using the stock hardware. See Photo 22. Do not tighten at this time.

27. Install passenger side diff bracket using stock hardware in upper location making sure the notch in the bracket goes

down. Do not tighten at this time. See Photo 23.

28. Reinstall diff in the forward driver side mount as shown in Photo 24 using supplied 12mm x 45mm bolts, washers.

Do not tighten at this time.

PHOTO 19 PHOTO 20

PHOTO 21 PHOTO 22

PHOTO 24

PHOTO 23

CUT USING A RECIPROCATING SAW CUT USING A RECIPROCATING SAW

INSTALL DIFF BRACKET INSTALL DIFF BRACKET

REINSTALL DIFF ON BRACKET

INSTALL PAS DIFF IN

BRACKET WITH NOTCH

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Rough-country 324S User Manual Page 7