Rough-country 324S User Manual download pdf (Page 14)

9. Remove upper track bar bolt using 21mm wrench. See Photo 7.

10. Remove the vent hose from the frame.

11. Remove coil springs. See Photo 8.

12. Remove the upper control arm using 24mm wrench and socket on the frame and axle. See Photo 9 & 10.

13. Install control arm in the axle and frame mounts with stock hardware. Tighten using 24mm wrench. See Photo 11 &

12.

PHOTO 7

PHOTO 8

PHOTO 9

PHOTO

PHOTO 11

REMOVE TRACK ROD FROM FRAME REMOVE THE COIL SPRING

REMOVE STOCK UPPER ARM FROM FRAME

REMOVE STOCK UPPER ARM FROM AXLE

INSTALL ARM ON AXLE

PHOTO 12

INSTALL ARM ON FRAME

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Rough-country 324S User Manual Page 14