Rough-country RC714 User Manual download pdf (Page 7)

25. On the inside of the front bumper where the tow hooks holes are measure 1/4 down on the inner bumper bracket

and cut even with the sides of the holes. See Photo 29.

26. Install front bumper using stock hardware with the supplied 12mm nuts. Use a 18mm socket and wrench to tighten

bumper bolts. See Photo 30.

27. Reinstall front grill using stock hardware and a 10mm socket to tighten all 8 bolts. Reinstall painted bumper bezel

using stock hardware. Reinstall steering shaft using a 15mm. Reconnect air inlet hose to air box. Reinstall radiator

bezel using the stock plastic clips.

28. Tighten the side bumper support bracket using a 15mm socket. Push the bracket up while tightening the bolts

PHOTO 29 PHOTO 30

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Rough-country RC714 User Manual Page 7