Rough-country RC714 User Manual download pdf (Page 6)

22. On the front frame horns measure the tow hook mounting hole on the side with only one hole 1 1/2” back and 1 3/16”

up from bottom of frame. See Photo 23. Mark the area and drill a new hole for the tow hooks using a 1/2 drill. Flip

the tow hooks and install bolts. Tighten using 18mm socket. See Photo 24.

23. Install new front bumper brackets using stock hardware, push up on the bracket when you tighten the bolts. Using

the bracket for a template mark and remove the lower inside of frame horn and out side corners. Use a sawzall or

cut off wheel to remove the material. See Photo 25, 26, and 27.

24. After cutting reinstall the bumper bracket with factory bolts and the supplied 10mm x 30mm button head bolt and

washer for the outside hole. Pull up on the bracket and tighten bracket using a 15mm socket and a 6mm allen

wrench. See Photo 28.

PHOTO 23

PHOTO 24

PHOTO 25

PHOTO 27

PHOTO 28

PHOTO 26

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Rough-country RC714 User Manual Page 6