Rough-country 1107 User Manual download pdf

92127400

TOOLS NEEDED:

Floor Jack

Jack Stands

22MM Wrench

24mm Wrench

36MM Wrench

Thank you for choosing Rough Country for your suspension needs.

Rough Country recommends a certified technician installs this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read all the instructions before beginning the installation. Check the kit hardware against the parts list. Be sure

you have all the needed parts and understand where they go. Also please review the tools needed list and make sure

you have needed tools.

PRODUCT USE INFORMATION

Do not add, alter this Rough Country product. We will not be responsible for any product that is altered.

NOTICE TO DEALER AND VEHICLE OWNER

Any vehicle equipped with any Rough country product must have the “Warning to Driver” decal installed on the sun visor

or dash. INSTALLING DEALER—It is your responsibility to install the warning decal and to forward these installation

instructions on to the vehicle owner for review and to be kept in the vehicle for its service life.

2011 GM 2500HD TIE ROD SLEEVE UPGRADE KIT

92110700

KIT CONTENTS:

2-Tie Rod End Sleeves

THANK YOU FOR CHOOSING ROUGH COUNTRY FOR YOUR SUSPENSION NEEDS

1 2

92127400 TOOLS NEEDED: Floor Jack Jack Stands 22MM Wrench 24mm Wrench 36MM Wrench Thank you for choosing Rough Country for your suspension needs.

Page 2

INSTALLATION INSTRUCTIONS 1. Straighten the front wheels on the vehicle and chock the rear wheels. 2. Jack up the front of the vehicle and place jac

No comments

Rough-country 1107 User Manual