7. Remove the side bumper support bracket using a 15mm socket . See Photo 7.
8. Unplug the fog lights and wiring harness from bumper. See Photo 8.
9. Use a 18mm socket to remove the four bolts holding the bumper on to the frame then remove bumper. See Photo 9.
10. Remove front bumper brackets using a 15mm socket. See Photo 10.
11. Then remove tow hooks using a 18mm socket and wrench. See Photo 11.
12. Using a 10mm socket remove the ground wires from frame. Two of the ground wires are on both front body mounts.
See Photo 12.
PHOTO 8 PHOTO 7
PHOTO 12 PHOTO 11
PHOTO 10 PHOTO 9
Comments to this Manuals