Rough-country 723.20 User Manual download pdf

2014 GM 2” FRONT & 4” REAR LOWERING KIT

Thank you for choosing Rough Country for all your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Check the kit hardware against the kit contents list on the back

page. Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure

you have the tools needed to install the kit.

PRODUCT USE INFORMATION

Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Take this

into consideration while driving. Do not add, alter, or fabricate any factory or after-market parts to decrease vehicle

height over the intended height of the Rough Country product purchased. Mixing component brands is not recom-

mended.

Rough Country makes no claims regarding lowering devices and excludes any and all implied claims. We will not be re-

sponsible for any product that is altered.

**Note** The electric power steering must be unplugged before any steering components are removed. Failure not to do

so can cause damage to the electric power steering.

We will be happy to answer any questions concerning the design, function, and use of our products.

NOTICE TO DEALER AND VEHICLE OWNER

INSTALLING DEALER / OWNER - It is your responsibility to install the warning decal and forward these installation in-

structions on to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.

92723200

Tools Needed:

24mm Wrench

22mm Wrench

21mm Wrench

18mm Wrench

15mm Wrench

13mm Wrench

12mm Wrench

10mm Wrench

8mm Allen Wrench

Drill Motor

Drill Bit 11/32

Drill Bit 15/32

Vise Grips

Die grinder

Floor Jack

Jack Stands

1 2 3 4 5 6 7

Summary of Contents

Page 1

2014 GM 2” FRONT & 4” REAR LOWERING KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified

Page 2

FRONT INSTALLATION INSTRUCTIONS 1. Lift the front of the vehicle using a jack and support the vehicle with jack stands, so that the front wheels are

Page 3

REAR INSTALLATION INSTRUCTIONS 1. Lift the rear of the vehicle using a jack and support the vehicle with jack stands, so that the rear wheels are o

Page 4

13. As shown in Photo 7, using a 15mm wrench and vise grips on the end of the pin, remove the ubolt plate and bolt. 14. After removing plate, flip

Page 5

19. Using a die-grinder or air chisel remove the three factory rivets on the hanger bracket. See Photo 13. 20. Use a 15mm socket to remove the top r

Page 6

27. Place the u-bolt plate with bolt head side in axle as indicated in Photo 19. 28. Install the provided u-bolts and new bottom plate as shown in

Page 7

Thank you for purchasing a Rough Country Lowering System. POST INSTALLATION 1. Check all fastene

Comments to this Manuals

No comments

Rough-country 723.20 User Manual

Browse online or download User Manual for For the car Rough-country 723.20. Rough Country 723.20 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Rough-country 723.20