Rough-country 9592 User Manual download pdf

Page 1

Thank you for choosing Rough Country Off Road Gear for your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

PLEASE READ INSTRUCTIONS BEFORE BEGINNING INSTALATION.

PRODUCT USE INFORMATION

As a general rule, the taller a vehicle is, the easier it will roll. Offset, as much as possible, what is lost in rollover resistance

by increasing tire track width. In other words, go "wide" as you go "tall".

Do not add, alter, or fabricate any factory or after-market parts to increase vehicle height over the intended height of the

Rough Country product purchased. Mixing component brands, lifts, and/or combining body lift with suspension lifts voids

all warranties. Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will

not be responsible for any product that is altered.

Braking performance and capability are decreased when significantly larger/heavier tires and wheels are used. Take this

into consideration while driving.

The required installation time for this system is approximately 2 hours (see recommended tool list shown below). This kit

is usually sold as a front end leveling kit, but can be sold in combination with rear blocks and u-bolts or a rear add-a-leaf.

Shocks with longer travel are recommended.

This suspension system was developed using 285x75R16 tire on an 8” wheel. Before installing other combinations,

please consult your local tire and wheel specialist.

If questions exist we will be happy to answer any questions concerning the design, function, and correct use of our

products.

NOTICE TO DEALER AND VEHICLE OWNER

Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of

the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehicle

of its unique handling characteristics.

INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on

to the vehicle owner for review. These instructions should be kept in the vehicle for its service.

KIT CONTENTS RECOMMENDED TOOLS

Torsion Bar Adjusters (2) Floor Jack

Heavy Duty Jack Stands

Safety Glasses

Wheel Chock

Torsion Bar Puller Tool

Impack Wrench

18mm Socket

92959200

88-98 Chevy/GMC 1500 Torsion Bar Adjuster Kit

1 2

Page 1 1

Summary of Contents

Page 1 - Page 1

Page 1 Thank you for choosing Rough Country Off Road Gear for your suspension needs. Rough Country recommends

Page 2

Technical Assistance - (731) 285-9000 Page 2 INSTALLATION INSTRUCTIONS 1. Place the vehicle in neutral. Raise the front of the vehicle with a j

Comments to this Manuals

No comments

Rough-country 9592 User Manual

Browse online or download User Manual for For the car Rough-country 9592. Rough Country 9592 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Rough-country 9592