Rough-country 89708 User Manual download pdf

JK FR / RR BRAKE LINE KIT FOR 4-6” LIFT

THANK YOU FOR CHOOSING ROUGH COUNTRY FOR YOUR SUSPENSION NEEDS.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known.

PRODUCT USE INFORMATION

Rough Country makes no claims regarding lifting devices or components and excludes any and all implied claims. We

will not be responsible for any product that is altered. If questions exist we will be happy to answer them concerning the

design, function, and correct use of our products.

928970700

12mm Brake Line Wrench

15mm socket

10mm Socket

Tools Needed:

INSTALLATION INSTRUCTIONS

1. Loosen the stock brake line from the metal line on the frame rail shown in Photo 1 using a 12 mm line wrench. A

catch pan will be needed to catch the brake fluid.

2. Remove the line from the frame rail using a 10mm socket as shown in Photo 2.

3. Remove the brake line from the caliper using a 15mm

socket.

4. Install the supplied brake line bracket with the stock hard-

ware using a 10mm socket.

5. Install the stainless brake line on the hard line with a

12mm brake line wrench.

6. Reattach at the caliper with new supplied crush washers,

tighten line and install the spring clip. See Photo 3.

7. After installation, the brake system must be bleed to en-

sure proper braking capacity and function.

Thank you for choosing Rough Country for your suspension needs.

Visit us on the web @ www.roughcountry.com for your off road needs

Photo 1 Photo 2

Photo 3

Page 1

JK FR / RR BRAKE LINE KIT FOR 4-6” LIFT THANK YOU FOR CHOOSING ROUGH COUNTRY FOR YOUR SUSPENSION NEEDS. Rough Country recommends a certified technic

No comments

Rough-country 89708 User Manual