Rough-country 1100 User Manual download pdf

JEEP JK 5-5” PATTERN TO 5-4 1/2”PATTERN

1-1/2”WHEEL SPACERS

Thank you for choosing Rough Country for all your suspension needs.

This wheel spacer / adapter kit allows the JK owner to install 5-4 1/2” wheels on the JK Jeep. Proper

wheel backspacing must be used when installing. Normally 3-3/4” backspace is sufficient but trial fitting

the wheels is recommended.

Professional knowledge of disassemble/reassembly procedures as well as post installation checks must be

known. Attempts to install these wheel spacers without this knowledge and expertise may jeopardize the integ-

rity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Also please

review tools needed list and make sure you have needed tools.

Kit Contents:

2-1 1/2” Wheel Spacers

92110000

Tools Needed:

19mm Socket

Torque Wrench

Floor Jack

Jack Stands

Flat Head Screwdriver

Installation Instructions

1. Chock the tires and jack up the vehicle.

2. Remove the lug nuts and remove the tire and wheel.

3. Remove the rotor retainer star washers is so equipped using a flat head screwdriver. Removing these will

allow the wheel spacer to sit flat on the rotor surface. These must be removed

4. Install the wheel spacers as shown with the supplied lug nuts. See Photo 1. Tighten to manufacturer specifi-

cations using a 19mm wrench.

5. Reinstall the tires/wheels. See Photo 2. Tighten the lug nuts holding the wheels and tires to factory specifi-

cations.

Photo 1

Photo 2

Post Installation

1. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine

vehicle service.

JEEP JK 5-5” PATTERN TO 5-4 1/2”PATTERN 1-1/2”WHEEL SPACERS Thank you for choosing Rough Country for all your suspension needs. This wheel spacer /

No comments

Rough-country 1100 User Manual