Rough-country 1043 User Manual download pdf

JEEP JK CANISTER RELOCATION BRACKET

Thank you for choosing Rough Country for your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Be sure you have all needed parts and know where they go.

Please review tools needed list and make sure you have needed tools.

PRODUCT USE INFORMATION

If question exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-

ucts by calling 1-800-222-7023.

92104300

Tools Needed:

10mm Socket / Wrench

3/4 Socket / Wrench

Reciprocating Saw

Grinder

PHOTO 1

INSTALLATION INSTRUCTIONS

1. All steps are performed after the front bumper is removed and ready for Rough Country Bumper installation.

2. Remove the canister from the frame using a 10mm socket / wrench. See Photo 1. Remove the connectors and lines

from the canister. Use care not to damage any lines or connectors. Retain the factory 10mm nuts.

1 2

Page 1

JEEP JK CANISTER RELOCATION BRACKET Thank you for choosing Rough Country for your suspension needs. Rough Country recommends a certified techni

Page 2

Thank you for purchasing a Rough Country Suspension Component. 4. Cut the canister bracket off as shown in Photo 3 from the frame rail using a recipr

No comments

Rough-country 1043 User Manual